SOIL TESTING LABORATORY EQUIPMENT

Approx. Rs 40,500 / PieceGet Latest Price

Total stresses when measured in a triaxial cell are more complex in their nature. Numerous parameters may be me measured including back, pressure, pore water pressure and volume change. From these values various engineering properties can be calculated.

Triaxial cell is used to apply total stress. The sample is subjected to and all-round confining pressure. Load is then applied through piston of triaxial cell on a pressure pad on the top of the specimen. In a triaxial cell, sample is confined in a rubber membrane. Brand Triaxial Cell are manufactured from carefully selected material. The cells are manufactured to accommodate different sizes of specimen Universal Triaxial Cell accommodates samples of diameters 38 mm to 100 mm.

SPECIFICATIONS:

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 70,000 / PieceGet Latest Price

The rotap sieve shaker reproduces the circular and tapping motion given to test sieves in hand sieving. The uniform, mechanical action ensures accurate and dependable test. Using the regular height 20-cm diameter sieves, one sample can be tested on a series of six sieves of different openings, all with one operation of machine. The Rotap Sieve Shaker is simple and durably constructed and is run by a FHP motor. The running parts operate in oil. The machine is easily installed. No special foundation is required. Test Sieves are supplied at extra cost. A time switch from 0 to 60 minutes is provided.

Additional Information:

• Item Code: SMA-49
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 20,000 / PieceGet Latest Price

The unit consists of two graduated burettes of 50ml. x 0.2ml. capacity enclosed tin two Perspex tubes sealed by two end caps. The manifold with valves enable the flow of fluid in the burettes to be reversed when the paraffin interfaces reach their limits in the burettes, the maximum capacity of measurement being only limited by the capacity of the mercury pots.

The two burettes, enable the reduction in error in meniscus reading due to reversal of flow, the average of the two burettes being always taken as the volume change reading.

SPECIFICATIONS:

When conducting triaxial tests on soil samples, it is observed that due to internal pressure, the cell expands, soil specimen consolidates resulting in the change of volume change Gauge is therefore devised to accurately measure volume changes.

This is measured by observing the quantity of water entering or leaving the cell as the cell pressure and axial load are changed it is achieved by the displacement of free surface between the water supplied to the cell and another fluid (Paraffin of kerosene).

A dye is added to the paraffin for clear demarcation of the interface.

The unit consist of a glass graduated tube of the appropriate capacity graduated to parts of a ml. enclosed in a perpex tube sealed by two end caps.

The unit is fitted with manifolds and valves which enable it to be sued with the triaxial cell and the constant pressure (Mercury controls) system.

The cell pressure can either be directly applied to the cell from the constant pressure system or through the volume change gauge.

The graduated glass tube is not subjected to any difference in pressure and its inside is coated with a layer of silicon water repellent to reduce the error in meniscus.

There is an arrangement for filling the unit with water and paraffin and a drainage valve is provided in the lower end cap.

The whole assembly is mounted on a panel suitable for wall mounting.

The unit is supplied complete with a pressure hose with end couplings and a packet of dye.

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: wooden boxes are used.

Approx. Rs 26,000 / PieceGet Latest Price

This is for determining the moisture density relation of soils. In this apparatus, small quantity sample is compacted under kneading action of the spring loaded tamper set either at 10kg or 20kg.As the sample required is very small, a number of tests can be carried out, each time taking a fresh sample. The time required for compaction is very much less. The mould can be inter changeably used with Miniature Field parameter  where permeability tests can be conducted at high pressures.

Additional Information:

• Item Code: SMA-57
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 11,400 / PIECEGet Latest Price

Additional Information:

• Item Code: SMA-41
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: WOODEN BOXES ARE USED.

Approx. Rs 19,000 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-42
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 8,500 / PieceGet Latest Price

The instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read to 40 kg division.

Long Stem is graduated at every 12.5 mm to read depth of penetration and for use with needles of larger areas.

The small penetration stem is also graduated in 12.5 mm division and is used with needles of smaller areas.

Needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, .3.5 and 6.0 sq. cm. and one tommy pin is supplied.

Complete as above in a wooden carrying case.

Additional Information:

• Item Code: SMA-43
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 13,000 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-45
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 75,500 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-71
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 45,000 / PieceGet Latest Price

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 85,000 / PIECEGet Latest Price

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: wooden boxes are used.

Approx. Rs 25,000 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-51
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 15,000 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-52
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: Wooden boxes are used.

Approx. Rs 11,000 / PieceGet Latest Price

As Per IS: 4434-1967 

The apparatus is designed for conducting in situ vane shear test from the bottom of a bore hole in saturated cohesive deposits for determining their in place shearing resistance. 

Specifications: The equipment consists of a torque applicator assembly mounted on a base. A gear wheel, which is marked in degrees, holds a torque ring and is geared to a crank. The torque ring is a split ring and deforms as torque is applied and the deformation is indicated by a dial gauge.

A calibration Chart to convert dial gauge reading to torque force in kg cm. is supplied. A pointer is provided for registering the rotation of the vane. A detachable stand is provided to anchor the instrument. An attachment to securely hold the string of rods is provided. The equipment comprises of the followings:

· Torque applicator assembly capacity 2000kg cm with split proving ring and dial gauge 0.002mm x 5mmcomplete with stand. 

· Vane (with vane rod) 37.5 mm dia. 75mm high………1No. 

· Vane (with vane rod) 50mm dia. x 100mm high………1 No 

· Torque rod (Square cross section) 0.6mtr. long……….1 No 

· Rods, quick coupling type, 1mtr. Long………………..25Nos. 

· Rods, quick coupling type, 1/2mtr. Long……………..10Nos. 

· Dummy rod, corresponding to 37.5 mm dia. vane….…1No

· Dummy rod, corresponding to 50 mm dia. vane………1No

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: wooden boxes are used.

Approx. Rs 39,000 / UnitGet Latest Price

 DESCRIPTION:

The C.B.R. Method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways.

Test can be made on all types of soils including sand, gravel, crushed stone etc. (Passing through 20mm IS sieve) C.B.R. test is used extensively for selection of materials and control of sub-grades. The procedure of test is very simple. A 50mm dia. penetration piston is forced in the test soil and loads required for the penetration to penetrate different depths are recorded by means of a proving ring fixed to the penetration piston assembly and a dial gauge.

SPECIFICATIONS:

The equipment consists one each of the following: load frame, Hand operated, Capacity 5000kg. with high and low rates of travel of the lead screw. Mould made from Gun0metal/Brass, 150mm internal dia. x 175mm high, with perforated base plate and extension collar 50mm high. Penetration piston, face dia. 50mm with adjustable bracket for penetration dial gauge. Circular metal space disc, 148mm dia. x 47.7mm high. With detachable handle.

Annular metal weight, 2.5k., 147mm dia. with 53mm dia. central hole. Slotted metal weight, 2.5kg. 147mm dia. with 53 dia. slot. Perforated plate made of Gun-metal/Brass 148mm dia. with adjustable stem and lock nut and a metal tripod for dial gauge. Cutting collar. Rammer 2.6kg weight with drop of 310mm. Rammer 4.89kg. with drop of 450mm. Supplied proving ring and dial gauge.

Additional Information:

• Item Code: SMA-80
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: WOODEN BOXES ARE USED.

Approx. Rs 18,000 / UnitGet Latest Price

Additional Information:

• Item Code: STC-25
• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: WOODEN BOXES ARE USED.

Approx. Rs 70,000 / PieceGet Latest Price

SPECIFICATION :-

Digital Load Frame

It is an advanced version of mechanical load frames. In this load frame, rate of strainis controlled through combination of electronics and micro stepper motor.

The unit operates on 220Volts 50Hz single phase supply.

Specification: Capacity of the load frame - 50kN Vertical Clearance - 800mm

Horizontal Clearance - 325 mm

Platen Diameter - 150mm

Platen Speed - 0.0001-9.9999mm/min

Weight - 110 Kg App.

Triaxial Cell for 38 mm diameter x 76 mm high specimen

Suitable for lateral pressure up to 1000 kpa, the cell has fourtake off positions

drilled in the base for cell pressure, pore waterpressure, and for top and bottom drainage.

Fitted with 4 no-volume change valves and one dead end plug.Cell is supplied complete with one load-ing pad, two porous stones, one sheath stretcher, one split

sand former, 10 latexrubber sheaths and four sealing rings for 38 mm dia samples.

Triaxial Cell for 38 mm diameter x 76 mm high specimen

Suitable for lateral pressure up to 1000 kpa,

AIR COMPRESSORS, 10 Kg/sq.cm.

De-Airing system with vacuum Arrangement

Electronic Data Acquisition system

Additional Information:

• Production Capacity: 10
• Delivery Time: 3-4 weeks
• Packaging Details: wooden

Approx. Rs 1.8 Lakh / PieceGet Latest Price

 A.       Electronic Models

                       I.         Model TE - M 200     

                       II         Model TE - R  200    

            B.       Mechanical Model

                    - Extra for load elongation recorder  

                       Accessories

Additional Information:

• Item Code: STSOM-02
• Packaging Details: CUSTOMIZE